     **************************************************************
     *                                                            *
     *               GSD files for GATE 3S from                   *
     *                Vishay Nobel AB, SWEDEN                     *
     *                  www.weighingsolutions.com                 *
     *              Version 1.1 Eng.  2013-10-16                  *
     *                                                            *
     **************************************************************
----------------------------------------------------------------------------------

Disk contents:


readme.txt          This file

hms_1003.gsd        Typedata file; GSD Revision 1.0 for AnyBus-S PDP



Notes:

The GATE 3S unit should be set up as a modular slave.


GATE 3S is using a AnyBus-S PDP PROFIBUS card from:

HMS Industrial Networks AB
Stationsgatan 37
SE-302 45 Halmstad
Sweden
Phone:   +46-35-172900
Fax:     +46-35-172909
www.anybus.com

- - - - - - - -

Configuration example 1: 4 microPOS units are connected to a GATE 3S

4 * 6 byte = 24 byte.

Select 16 byte I/O and 8 byte I/O = 24 byte I/O in the master.

- - - - - - - -

Configuration example 2: 3 AST3 units (6 byte mapping) are connected to a GATE 3S

3 * 6 byte = 18 byte.

Select 16 byte I/O and 2 byte I/O = 18 byte I/O in the master.

- - - - - - - - 

Configuration example 3: 5 AST3 units (20 byte mapping) are connected to a GATE 3S

5 * 20 byte = 100 byte.

Select 64 byte I/O and 32 byte I/O and 4 byte I/O = 100 byte I/O 
in the master.

------------------------------------------------------------------------------------
FQA

Siemens S5 and GATE 3S with GSD-file ?

Q. I am trying to use a GATE 3S with Siemens S5. When I try to load the GSD-file in 
   the Siemens configurator COM-Profibus, it complains and asks for a 200 file. 
   What is a 200-file and what 200-files can you provide? 

A. The 200-file is an older format of config-files. It is possible for us to make 
   a 200-file for a special application. But we do not provide such files as standard 
   for AnyBus-S. The 200 format is limiting the possibilities with AnyBus-S. 
   But for a special application it may be enough with smaller data amounts and then 
   we can design a special 200-file. Please consult HMS if this is the case. 

-------------------------------------------------------------------------------------
